Skip to content

Category: Stream

Season 01 – Episode 38 – Fitting the Rig to Geometry, Re-acquisition

Published by Raffaele on 31 December, 2018

Fitting the Rig to Geometry

I announced this episode as a chill stream, but it accidentally came out quite well paced (at least in my opinion.) Always accidentally it’s the last day of the year and the episode ended up being a recap of everything we did during the year, which I also find fitting (no pun intended).

Initially I just wanted to reacquaint myself and the audience with the rig we’d been working on for so long, and I thought that fitting it to some geometry to put it to the test would have been a good way to go about it.
We did do that, in the end, but the outcome is an inspection and a summary of all components as well as a successful fit of the guides lining up everything to the geometry, and the first chunk of work on a scene to be shared done.

Leg Global, Godnode and Foot are all in good shape now, and next stream we should be able to do the leg, call it a wrap on the mehcanics (unless some bug or other rears its ugly head) and finally move on actually binding to the geo.

Whether you’ve been following all along and took a long break with me, or you’re bumping into this while binging on the whole season after it got done weeks or months away from me writing, I think it’s been a worthwhile episode.

Enjoy,

Season 01 – Episode 37 – Modular Components, Reassembling the Rig

Published by Raffaele on 30 June, 2018

Modular Components and Rig Assembly

I’ve talked about components being modular before and I’ve shown the I/O process in the past, but this time around we do it for real.

There isn’t anything specific that’s new, but I did kind of like how it went and I would recommend watching it. It will take you through the whole process of componentisation and assembly well enough.

There’s a bit of everything in it, Maya bugs, scripting, tiny amount of nodelling, Q/C, conforming, the actual I/O of the components…
All in all I feel it came out well paced and it covers a good chunk of ground in one hour.

To be a bit more specific: This is where we take all of our components and we push them through the I/O process (to file and from file) both for Q/C (Quality Control) as well as to actually re-assemble a full rig.

In the process I list a couple gotchas with containers, find a non-bug, and we write a trivial renaming script (more for variety than anything). All the work gets done on time, and we fix the last couple dirty bits in our components, which turned out to be bug-free, and only in need of some conforming.

QnA, the last dozen minutes or so, is mostly me rambling about rig standards, instrumenting rigs, and pipelines at scale and not.

As usual the code is available on GitHub in the didactic section but it really isn’t anything much.

Enjoy,

Season 01 – Episode 36 – Finished All Components

Published by Raffaele on 24 June, 2018

Finished Components With Working Symmetry

After warming back up to the rig in the previous stream yesterday this went pretty well, even if I say so myself.

Most of the content is nodelling and reviewing what I’m doing and why, but there’s a good amount of work happening at a relatively snappy pace.

Bugs (presumed) of the previous day are squashed, all components are made to properly guide and deguide, handedness is now considered for the foot too, the foot receives a proper deform layer, our tool for guiding is confirmed working… And more.

It is a nodelling episode, which we’ve had many of, but it’s a good one in my opinion, and it finally takes us to what might be the finish line for all components. I/O and re-assembling the rig should be all that’s left next (unless we will find issues 😉 ).

As for the previous episode I recorded a brief intro which is available in the first link/embed below, you can watch that if you want a quick verbal preview of what goes on in the episode, but it’s mostly what you have just read.

Enjoy,

Season 01 – Episode 35 – Warming Back up to the Rig and Foot Symmetry

Published by Raffaele on 24 June, 2018

Warming back up to the rig

It’s been a while since I last had streamed.

There isn’t much about this episode that is remarkable.

If you were following the season through its progress and you’re as rusty as I was then it might be worth watching me as I re-compose the structure of the rig in my head and prepare for some work on the foot, otherwise it’s not a particularly eventful one.

Below, before the link to the episode itself, I’m linking the intro I made for it which explains what will be in it and at what times so that you can decide if you care to watch the entire episode or some parts of it.

Enjoy,

Season 01 – Episode 34 – Everything Else About Mirroring

Published by Raffaele on 24 June, 2018

Mirroring Components, Everything Else

Different format than usual for this episode!

There was a good chunk of work that would be repetitive and boring to do on-stream as nodelling, so unlike in any previous episode I decided to do it off-stream and then bring the rig up to comment on why and how it was done and the underpinning fundamentals.

This is meant to compress the time to finish the rig a bit and offer a more concise episode.

I like how it came out and it seems to have been well received, so it might happen again, albeit probably not this season since the work remaining should generally speaking be new and/or interesting to see through its execution.

So, to make a long story short: This video goes over everything about mirroring components that is required to get a fully reflected component for the leg and shows the rig in action.

I recommend downloading the corresponding ep34 scene from the download section to follow along by exploring the scene as I go over it.
It can be found here as usual.

Enjoy,